Specific network requirements for IPerCom are as follows –
The following ports must be open and not restricted –
TCP ports 2049, 51234, 5060, 50118, 3306, 13451 to 3460, 111, 80, 433, 41365, 22,
918 & 40279.
UDP ports 32768, 2049, 514, 32771, 34956, 917, 34839, 67, 5060, 69, 975, 111, 123.
Multicast must be enabled on 238.0.0.200:55000 and on 239.255.0.200 (all ports).
TCP/UDP ports used for Internet access (if any) TCP:5060,6060 UDP:5060,6060.
Bandwidth per end point (Kbps) 2500 for upload and 10000 for download.
To Next Page
Loading...
