Need help?Do you have a question about the US Cutter MH Series and is the answer not in the manual?
General| Maximum Cutting Force | 350 grams |
|---|---|
| Drive Method | Stepper motor |
| Weight | Varies by model |
| Available Sizes | MH 871 |
| Interface | USB |
| Software Compatibility | Windows |
| Blade Type | Roland Compatible |
| Power Supply | 110V/220V |
| Media Types | Vinyl, heat transfer vinyl |
| Cutting Width | 34 inches |
| Maximum Cutting Speed | 600 mm/s |
Critical safety warnings including sharp edges, electrical shock, and the need for adult supervision during operation.
Step-by-step guide on how to install, set depth, and adjust the blade for cutting.
Describes the main screen, speed, force settings, and core buttons like Reset and Test.
Explains how to use offline mode for repositioning and pausing operations.
Instructions for physically connecting the cutter to a computer using different cable types.
Guide to downloading and installing the necessary cutting software.
Solutions for erratic cutting, stopping mid-cut, and inconsistent line quality.
Addresses issues like jagged cuts, slashes, poor feeding, warped cuts, and corner accuracy.
To Next Page
