Need help?Do you have a question about the US Robotics USR5637 and is the answer not in the manual?
Steps to install the USRobotics 5637 external modem using the CD driver.
Select language and confirm the End User Software License Agreement for the modem software.
Select the option to install the modem from the main installation interface.
Confirm Windows security prompts and finalize the device driver installation.
Plug the modem into the USB port and verify its installation in Device Manager.
Access network settings via Control Panel to begin creating a dial-up connection.
Set up a new dial-up connection by entering ISP details and skipping initial connection attempts.
Access adapter settings, create a shortcut, and configure modem properties for the dial-up connection.
Input the phone number and initiate the dial-up call to connect.
Open a browser and navigate to the factory IP address to access the programming interface.
General| Modem Type | External |
|---|---|
| Interface | USB |
| Error Correction | V.42, MNP2-4 |
| Data Compression | V.44, V.42bis, MNP5 |
| Max Data Transfer Rate | 56 Kbps |
| Max Fax Transfer Rate | 14.4 Kbps |
| Data Protocols | V.90, V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21 |
| Fax Protocols | V.17, V.29, V.27ter |
| Operating System Compatibility | Windows |
To Next Page