IM 50.560CA UA (B/4-03) 5
DEPOLOX
®
3 PLUS RESIDUAL ANALYZER
1.3 pH Sensor Kit (AAB5386)
NOTE: When used for pH compensated Free chlorine measurement,
the pH range must be between 6 and 9.
NOTE: Where the standard 1.5-meter sensor cable is not long enough
(for special installations up to 50-meter cable length), an impedance
transformer is used to convert the very high-resistance electrode sig-
nal of the pH to a low-resistance signal. The impedance transformer
(Part No. U95607) is screwed onto the pH sensor cable. The imped-
ance transformer is powered by an integral battery. Battery lifetime
is approximately five years.
1.4 Fluoride Sensor Kit (AAB5389)
egnaR 01otpusnoitulosdetarutas
6-
M
)mpp20.0(
egnaRHp 01ta7Hpot5Hp
6-
)-Fmpp10.0(M
01ta11Hpotpu
1-
)-Fmpp0091(M
egnaRerutarepmeT 221ot32 ° 05ot5-(F ° )C
NOTE: An impedance transformer is used to convert the very high-
resistance electrode signal of the fluoride sensor to a low-resistance
signal. The impedance transformer (Part No. U95607) is screwed
onto the fluoride sensor cable. It is powered by an integral battery.
Battery lifetime is approximately five years.
rosnesHpfoegnaR 41Hpot0
egnarerutarepmeT 221ot32 ° 05ot5-(F ° ehtrof)C
retawelpmas
erusserP )rab4(gisp06.xam
ytivitcudnoC mc/Sµ003>
To Next Page
Loading...