IM 50.560CA UA (B/4-03) 77
DEPOLOX
®
3 PLUS RESIDUAL ANALYZER
Table 4.1 - Errors (Cont’d)
In case of an alarm:
• the alarm LED will become illuminated
• the display will detail the specific alarm every five seconds for one
second for each alarm.
• if an alarm relay is associated to the alarm condition, the delay time
will begin. At the end of the delay time the relay will be triggered.
NOTE: Refer to Table 4.2 - Relay / Display Operation During Alarm
Conditions, for details.
egasseMrorrEesuaCydemeR
sgninraW
)d'tnoc(
*?nIlatigiD*tupnilatigidehttalangiS,langisehtfonigiroehtrofkcehc
wolootwolfretawelpmas,.g.e
desutonfipmuj
srorrElanoitiddA
yalpsidonsaheciveDrewopsniamoN
fognittesgnorwroesufevitcefeD
egatlovsniam
hctiwssniamlanretxenonruT
ecalperdnagnittesegatlovkcehC
3.1.2hpargarapees,esuf
gnorweulavtuptuo/deyalpsiDnoitarbilacgnorw
snoitulosreffubdlO
etylortceledlO
gnittesrogniriwgnorW
noitarbilacweN
ecnanetniamrosnes
gnittesdnagniriw,rosneskcehc