USR IOT USR-GPRS232-730 - At+Regtp; At+Regid; At+Regdt

USR-GPRS232-730 User Manual h.usriot.com
Jinan USR IOT Technology Limited / 45 www.usriot.com
38
4.2.1.35. AT+REGTP
function : query/set register package data type.
format :
query parameter introductions:
AT+REGTP=?{CR}
{CR}{LF}+REGTP:<"ICCID","IMEI","REGID","REGDT">{CR}{LF}{CR}{LF}OK{CR}{LF}
query current value of parameter:
AT+REGTP{CR} or AT+REGTP?{CR}
{CR}{LF}+REGTP:type{CR}{LF}{CR}{LF}OK{CR}{LF}
set parameter:
AT+REGTP=type{CR}
{CR}{LF}OK{CR}{LF}
parameter :
type : type of register data
“ICCID” : ICCID code
“IMEI” : IMEI code
“REGID” : register ID ( for D2D function )
“REGDT” : user-defined data
4.2.1.36. AT+REGID
function : query/set register ID(used for D2D).
format :
query parameter introductions:
AT+REGID=?{CR}
{CR}{LF}+REGID:<id>{CR}{LF}{CR}{LF}OK{CR}{LF}
query current value of parameter:
AT+REGID{CR} or AT+REGID?{CR}
{CR}{LF}+REGID:id{CR}{LF}{CR}{LF}OK{CR}{LF}
set parameter:
AT+REGID=id{CR}
{CR}{LF}OK{CR}{LF}
parameter :
id : register ID
4.2.1.37. AT+REGDT
function : query/set register user-defined data.
format :
query parameter introductions: