Section 5 OTHER CONVENIENT FUNCTIONS
5-33
8
Press the [Start] key.
Scanning of the originals will start.
If you set the originals in the optional Document Processor,
copying will start automatically.
If you set an original on the platen, a message will appear
telling you to set the next original. In this case, go to the next
step.
9
Replace the first original with the next one and press the
[Start] key. Scanning of that next original will start.
10
Once you have finished scanning all of the originals, touch
the “Scanning finished” key. Copying will start.
To Next Page
Loading...
