Utax CD 1222

Troubleshooting
6-3
Printing cannot be
performed.
Is the power plug connected to an AC
outlet?
Connect the plug to an AC outlet. 2-10
Is the main power switch turned on? Turn the main power switch on ( | ). —
Is a proper printer cable connected
securely?
Connect the printer cable securely. 2-9
Was the printer cable connected after
this machine was turned on?
After connecting the printer cable, turn
this machine on.
2-9
Is the machine offline? (Is the Ready
indicator off?)
1 Press the Print key to display
the printer basic screen.
2 Press the S key or the T key to
select GO.
3 Press the Enter key. The Ready
indicator lights up.
—
Correct characters are not
printed.
Is a proper printer cable connected? Connect a shielded type printer cable. 2-9
Printing is not performed
properly.
Is the setting on the computer correct? Check the setting of the printer driver or
the application software.
—
The copies are curled. Is the copy paper wet? Replace the copy paper with dry, new
paper.
2-1
Is Middle 2 set at the Paper type
(Paper Weight) setting? (Normally,
Middle 2 is set.)
Set Middle 1 at the Paper type (Paper
Weight) setting.
-
Symptom Items to check Corrective procedure Reference
page