Troubleshooting
6-15
3
Remove any jammed paper without tearing it.
Note If the paper does happen to tear, remove any loose scraps from inside the machine.
4
Close the left cover.
Paper Jam in the Optional Document Processor
If Misfeed in DP. Remove original(s) appears
and the jam location indicator shown in the illustration
blinks, a paper jam has occurred in the optional
document processor. Perform the following procedure
to remove the jammed original(s).
1
Remove all of the originals remaining in the original
table.
2
Open the left cover.
3
Remove any jammed original without tearing it.
Note If the original does happen to tear, remove any loose scraps from inside the document processor.
Failure to do so may cause another paper jam later.
Misfeed in DP.
Remove original(s)
JAM70
To Next Page
Loading...
