Utax CLP 3726 User Manual

2/3
7 Remove the developing units. 8 Remove the right cover and the >HIGH VOLTAGE PWB<.
9 Check the resistor from the drum contacts.
10 Resistor > 1 Ohm  set the correct position of the drum springs.
HIGH VOLTAGE PWB
Figure  right side
Figure  inner side
CYAN
BLACK
MAGENTA
YELLOW
Ω
Ω
Ω
Ω
right side
inner side
The resistor between the contact springs
(red) must be < 1 Ohm.
wrong
OK

Utax CLP 3726 Specifications

General

Brand	Utax
Model	CLP 3726
Category	Printer
Language	English