Utax P-5531DN

Operation Panel
4-50
Font (Selecting the default font)
You can select the default font. The default font can be one of the internal fonts or a font that is downloaded to the printer
memory or stored on SD card, or SSD.
In this menu, you can also set the type and pitch for Courier and Letter Gothic.
The options available in Font menu are as follows:
• Selecting Regular or Dark Courier/Letter Gothic...4-51
• Changing the Default Font Size...4-51
• Character Pitch...4-52
1 In the Print Settings menu, press  or  to select Font.
2 Press [OK]. The Font menu screen appears.
3 Press  or  to select Font Type.
4 Press [OK]. The Font Type screen appears.
5 To select a font built-in the printer, press  or  to select Internal.
6 Press [OK]. Select the font type and the Font menu reappears.
7 Press  or  to select Font ID.
8 Press [OK]. The Font ID entry screen appears.
9 Press  or  to select the number of the desired font.
To select optional fonts other than those built-in, select Option in
step 5. You can perform this operation only when optional fonts are
installed in the printer.
Font:
Courier
Exit
03
Font ID
02
01
Font Type
Font Type:
Internal
01
Option
02
*
Font:
Courier
Exit
03
Font ID
02
01
Font Type
Font ID:
I000
Note It is possible to check the numbers of the built-in fonts
by outputting a Font List. For details, refer to Font List
(Printing a list of the printer's fonts) on page 4-14.