Utax P-5531DN

To Next Page

To Previous Page

Document Box

5-16

Quiet Mode (Selecting the Quiet Mode)

Lower print speed for quiet processing. Select this mode when the running noise is uncomfortable. For details, refer to Quiet

Mode (Setting the Quiet Mode) on page 4-150.

1 In the Copies menu or the Paper Source menu, press

[Function] ([Right Select]). The Function menu appears.

2 Press  or  to select Quiet Mode.

3 Press [OK]. The Quiet Mode screen appears.

4 Press  or  to select On or Off.

5 Press [OK]. The Quiet Mode is set and the Function menu

reappears.

Duplex (Setting the duplex printing)

Set duplex printing. For details, refer to Duplex (Setting the duplex printing) on page 4-46.

1 In the Copies menu or the Paper Source menu, press

[Function] ([Right Select]). The Function menu appears.

2 Press  or  to select Duplex.

3 Press [OK]. The Duplex screen appears showing the list of available

duplex printing modes.

4 Press  or  to select the desired duplex printing mode.

The message display toggles through the following:

Off

Bind Long Edge

Bind Short Edge

Selecting Off disables duplex printing.

5 Press [OK]. The duplex printing mode is set and the Function menu

reappears.

Note The processing speed will be slower than normal when in Quiet Mode.

This cannot be used when Prohibit is set for Each Job (Permission for settings for each jobs) on page 4-151.

Function:

EcoPrint

Duplex

Quiet Mode

Quiet Mode:

Off