To Next Page
L
Lisa WillisSep 1, 2025
What does Job restricted Press GO mean on Utax Printer?
- JjennifermooreSep 1, 2025
If your Utax Printer displays 'Job restricted Press GO', press [GO] to return the printer to the print-ready status.
What does Job restricted Press GO mean on Utax Printer?
If your Utax Printer displays 'Job restricted Press GO', press [GO] to return the printer to the print-ready status.
How to fix grey background on Utax P-C2660DN?
If your Utax Printer is producing a grey background on printouts, conduct color calibration either by switching the printer off then on or using the printer operation panel.
What does Illegal Account Press GO mean on Utax P-C2660DN Printer?
If your Utax Printer displays 'Illegal Account Press GO', press [GO] to return the printer to the print-ready status.
How to fix offset on Utax P-C2660DN Printer?
To correct offset issues on your Utax Printer, refresh the drum. Additionally, run [MC] and increase the adjustment value.
Why is my Utax P-C2660DN emitting steam?
If your Utax Printer is emitting steam around the top tray, it may be due to low room temperature or damp paper. The heat generated during printing can cause moisture in the paper to evaporate, appearing as steam. This is normal. If it concerns you, raise the room temperature or use newer, dryer paper.
What to do if Utax P-C2660DN Printer says cassette not loaded?
To solve this problem, install the cassette in your Utax Printer.
Utax P-C2660DN Printer won't turn on, what should I do?
If nothing lights up on the operation panel of your Utax Printer, even when it's turned on, try these steps: * Turn off the printer’s power, securely plug in the power cord, and try turning the printer on again. * Ensure the power switch is securely pushed.
How to fix vertical streaks on Utax Printer?
To address black or white vertical streaks on your Utax Printer output: * Check the operation panel for toner levels. If the Toner low C,M,Y,K message is displayed, install a new toner kit for the indicated color. * Clean the LSU. * Refresh drum.
What to do if Utax P-C2660DN prints status page but not from computer?
If your Utax Printer prints a status page but not jobs from the computer: * Ensure both ends of the printer cable are securely connected; try replacing the printer cable or the interface cable. * If the issue is with a specific file or application, check the printer driver settings for that application; try printing another file or using another print command.
How to resolve faint or blurred printing on Utax P-C2660DN Printer?
If you are experiencing faint or blurred printing with your Utax Printer, consider the following solutions: 1. Clean the LSU. 2. Ensure the paper type setting is correct for the paper you are using. 3. Conduct color calibration by either switching the printer off and on or using the printer operation panel. 4. Try adjusting the color control settings using the printer driver. 5. If the Toner low C,M,Y,K message is displayed, install a new toner kit for the color. 6. Refresh drum. 7. Run [MC] and decrease the adjustment value.
General| Print Technology | Laser |
|---|---|
| Print Speed (Black & White) | 26 ppm |
| Print Speed (Color) | 26 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Maximum Resolution | 1200 x 1200 dpi |
| Duplex Printing | Yes |
| Monthly Duty Cycle | 50, 000 pages |
| Standard Paper Tray Capacity | 250 sheets |
| Multi-Purpose Tray Capacity | 100 sheets |
| Standard Output Capacity | 150 sheets |
| Maximum Output Capacity | 150 sheets |
| Maximum Print Size | A4 |
| Processor Frequency | 800 MHz |
| Internal Memory | 512 MB |
| Paper Tray Media Types | Plain paper, Recycled paper, Thick paper |
| Multi-Purpose Tray Media Types | Plain paper, Recycled paper, Thick paper, Envelope, Label |
| Connectivity | USB, Ethernet |
| Operating System Compatibility | Windows, Mac, Linux |
