1111
Key [1]Key [1]
OO
This is the position at which the key may beThis is the position at which the key may be
inserted or removed.inserted or removed.
Gasoline and diesel engines will stop when theGasoline and diesel engines will stop when the
key is turned to this position.key is turned to this position.
ONON
The electric circuit is closed with the starter switchThe electric circuit is closed with the starter switch
at ―at ―
┃┃
‖ (ON). After the engine starts, the key remains in‖ (ON). After the engine starts, the key remains in
this position.this position.
When the key is turned to the ―START‖ position, theWhen the key is turned to the ―START‖ position, the
starter motor is engaged. Switch returns to the ―ON‖starter motor is engaged. Switch returns to the ―ON‖
position automatically after starting.position automatically after starting.
Diesel engineDiesel engine
Turn the key to ―ON‖ position, the indicator light willTurn the key to ―ON‖ position, the indicator light will
come on momentarily. After the indicator light goes out,come on momentarily. After the indicator light goes out,
turn the key to ―Start‖ position.turn the key to ―Start‖ position.
CAUTIONCAUTION
1. Do not leave the key in the ―1. Do not leave the key in the ―
┃┃
‖(ON)‖(ON)
position when engine is off. Doing so willposition when engine is off. Doing so will
discharge discharge batterybattery..
2. Do not turn key to the ―START‖2. Do not turn key to the ―START‖
position when the engine is running. Doing soposition when the engine is running. Doing so
may damage the starter motor.may damage the starter motor.
3. Do not keep key in the ―START‖3. Do not keep key in the ―START‖
position for more than 5 seconds at a time.position for more than 5 seconds at a time.
Wait about 2 minutes between attempts.Wait about 2 minutes between attempts.
Reversing switch [2]Reversing switch [2]
The forward reverse lever of truck is installed withThe forward reverse lever of truck is installed with
electronic reversing and is set on the left of steeringelectronic reversing and is set on the left of steering
column.column.
F—Forward; N—neutral;F—Forward; N—neutral;
After allocation—backwardAfter allocation—backward
CAUTIONCAUTION
Do not forget to place the forwardDo not forget to place the forward--
reverse lever in the neutral position beforereverse lever in the neutral position before
starting the engine.starting the engine.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
