EasyManua.ls Logo

UTILEV UT25C - Page 18

Default Icon
149 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1212
Turn Signal Lever [3]Turn Signal Lever [3]
Use this lever which is at the Use this lever which is at the right side of steeringright side of steering
column to indicate the turning direction of the truck.column to indicate the turning direction of the truck.
RR
--
right turn,right turn, NN--neutral,neutral, LL--left turn.left turn.
The turn signal lever does not automatically returnThe turn signal lever does not automatically return
to the neutral position unlike general passenger cars. Itto the neutral position unlike general passenger cars. It
must be returned to thmust be returned to the neutral position manually.e neutral position manually.
Light switch [4]Light switch [4]
This light switch can be pulled out at two stopsThis light switch can be pulled out at two stops
LightLight
StageStage PowerPower
SmallSmall
LampLamp
HeadHead
LampLamp
SideSide
LampLamp
00 ××
11
stst
×× ×× ××
22
ndnd
×× ×× ××
(×) means connected(×) means connected
Alarming light switch [5]Alarming light switch [5]
Pull outPull out--alarming light is onalarming light is on
Press downPress down--alarming light is offalarming light is off
Horn Button [6]Horn Button [6]
Press the rubber cover at the center of steeringPress the rubber cover at the center of steering
wheel to sound horn.wheel to sound horn.
Dual Fuel Toggle Switch [7]Dual Fuel Toggle Switch [7]
(Only for LPG(Only for LPG--gasoline forklift)gasoline forklift)
From LPG to GASFrom LPG to GAS
11
With the truck off, change the dual fuel toggleWith the truck off, change the dual fuel toggle
switch from LPG position to GAS position to beginswitch from LPG position to GAS position to begin
running on GAS. Start truck.running on GAS. Start truck.
22
If the engine stops, check that the dual fuelIf the engine stops, check that the dual fuel
toggle switch is set to GAS position and then retoggle switch is set to GAS position and then re --startstart
the engine.the engine.
From GAS to LPGFrom GAS to LPG
11
With the truck off, place the dual fuel toggleWith the truck off, place the dual fuel toggle
switch from GAS to LPG to run on LPG. Startswitch from GAS to LPG to run on LPG. Start
truck.truck.
(2(2
If the engine stops, check the shutoff valve at theIf the engine stops, check the shutoff valve at the
vent end of the cylinder, and then check that thevent end of the cylinder, and then check that the
dual fuel toggle dual fuel toggle switch is in LPG switch is in LPG position. position. NextNext
re-start the truck.re-start the truck.
https://www.forkliftpdfmanuals.com/

Related product manuals