11
CARE AND CLEANING
CAUTION: Before attempting to clean the xture, disconnect the power to the xture by turning
the breaker off or removing the fuse from the fuse box.
See safety information before proceeding. Routine maintenance should be done at least once a year.
• Never use solvents, thinner or harsh chemicals for cleaning the fan.
• Do not allow water to enter the motor.
• Do not immerse metal parts in water.
• Do not immerse resin parts in water more than 140°F.
BEFORE INSTALLATION
WARNING: RISK OF ELECTRIC SHOCK! Ensure the electricity
to the wires you are working on is shut off. Either remove the
fuse or turn off the circuit breaker before cleaning.
OPERATING INSTRUCTIONS (Continued)
3. To use the fan in full speed mode, toggle the wall switch
on and off. The LED indicator light in the grille (B) will be
AMBER.
3
4. To turn the fan off, ip the wall switch to the "OFF"
position.
4
Amber indicator
light
B
To Next Page
Loading...
Need help?
General