UTP MAX - Installing the Terminal

6
Installing the terminal
1. Power the
terminal on by
pressing the
power key for
3 to 4 seconds.
From the initial
power on screen
swipe right or
left, then tap the
NER PAY icon
4. Tap the
Wifi network
option that the
terminal is to be
connected to
2. Select Open
settings
5. Enter the
relevant
password of the
network, then
select
CONNECT
3. The terminal
will scan for
local available
networks and
provide a list to
select from
6. A successful
connection
is indicated
with the icon
turning green.
Select DONE,
the terminal will
return to the
initial installation
screen