10UV Smart D25 | Instructions for use | Revision 9 EN
Warnings
Upon delivery, check that all items are present, without debris and undamaged.
Do not use a damaged D25. If you think the D25 is damaged, dirty or items are
missing, please contact UV Smart or your local distributor.
Do not place the D25 in a position where a patient or user could come to harm
should it fall.
Do not transport the device on a cart if not properly positioned and/or xed.
Transportation with or afxing to a trolley is at the customer’s own risk.
Do not use the USB-port on the back of the device. The port is for UV Smart
equipment and maintenance personnel only.
Do not use the D25 in an oxygen enriched environment or in the vicinity of
combustible gases (e.g. anesthetics).
The D25 must only be connected to a supply mains with protective earth, to avoid
the risk of electric shock.
Visible debris should be removed from the medical equipment surface according to
the corresponding instructions for use provided by the manufacturer before placing
it inside the D25 for disinfection.
Protect the D25 and the power supply against liquids and moisture.
Follow the instructions as indicated on the device display.
Do not insert medical equipment with working channels.
Do not insert invasive medical equipment.
Do not insert medical equipment made of organic materials.
Only insert medical equipment consisting of hard, non-porous outer surfaces.
Warnings and precautions
Proprietary & Confidential - Page 10 of 41 - Uncontrolled if Printed
To Next Page
Loading...
