UV Smart D25 | Instructions for use | Revision 9 EN 9
Non-medical D25 Use
UV-C light can be applied on hard, non-porous surfaces. This also includes surfaces
of non-medical devices.
The UV Smart D25 can be used for disinfection of the hard, non-porous outer
surfaces (glass, plastics, metal) of the following non-medical devices:
▪ Telephones;
▪ Smartphones;
▪ Tablets;
▪ Badges;
To be disinfected surfaces cannot be shadowed or covered during the disinfection
process.
After using the D25 for disinfection of non-medical devices, all visible debris
should be removed from the disinfection chambers to make sure disinfection is not
impaired. The D25 can be applied for medical use again only if all visible debris is
removed from the disinfection chambers.
All information provided on the following pages of this Instruction for Use is also
applicable for non-medical use of D25.
Proprietary & Confidential - Page 9 of 41 - Uncontrolled if Printed
To Next Page
Loading...
