UV Smart D25 - Introduction

UV Smart D25 | Instructions for use | Revision 9 EN 5
Introduction
The UV Smart D25 is a software-controlled medical device which provides
disinfection of hard, non-porous outer surfaces of non-invasive medical devices
1
using UV-C light.
The UV Smart D25 consists of a sealed disinfection chamber containing ultraviolet
germicidal lamps. When in use, the UV-C light that is used for disinfection cannot
escape the D25, guaranteeing safe use of the D25.
The germicidal effect of UV-C light will not penetrate dirt, debris and grime. To allow
the D25 to perform optimally, it is required that all medical equipment is cleaned
before use, according to the corresponding instructions for use provided by the
manufacturer.
The UV Smart D25 should be used by informed personnel. The Instructions for Use
should therefore be read prior to operation.
1
Non-invasive medical device:
A device which, in whole or in part, does not penetrate inside the body, either through a body orice or
through the surface of the body.
Proprietary & Confidential - Page 5 of 41 - Uncontrolled if Printed