UV Smart D25 - Page 26

26UV Smart D25 | Instructions for use | Revision 9 EN
Close the lid again
manually to restart the
disinfection run.
Refer to the contact details
page in this Instructions
for Use (p.37) and contact
UV Smart or your local
distributor.
Code 1
There is a defect
related to the
D25 disinfection
process.
Code 2
Maintenance
has not been
performed for
an extensive
amount of time.
Unsuccessful disinfection
D25 out of service 1-2
F
G-1
G-2
A negative sound
is played
A negative sound
is played
The disinfection
chamber lights up
red
The disinfection
chamber lights up
red
www.uvsmart.com/service
www.uvsmart.com/service
Proprietary & Confidential - Page 26 of 41 - Uncontrolled if Printed