(1) Measuring input
(2) LCD display (function field)
(a) Function
(b) Measuring point, 2nd meas. value
(c) Unit for 2nd meas. value
Main field
(d) Unit 1
st
meas. value
(e) 1st meas. value
(f) Operating states:
LOBAT: Battery voltage < 3,8V
REL: Relative measuring
(3) Operating keys
ON /OFF: To switch the device on; to switch off press
and hold down
M▲ M▼ Meas. point selection
MAX MIN Max. / min. value
cancel: press key and hold down
MEM Measured value memory
Switch on with pressed keys:
CLR Reinitialisation
Rear of device:
(4) Battery compartment 3 AA alkaline-manganese
batteries
To Next Page
Loading...