Page 7/10
HI 1 - E Manual v1.1.0.doc, AR, 15.06.2011 Glauburgstraße 34 D-63683 Ortenberg
Änderungen vorbehalten / All data are subject to alteration. welcome@uv-technik.com www.uv-technik.com
8 Display and key pad
8.1 Display
The display (2) on the HI 1 is a 2-row LCD arrangement; the main field comprises 5x 7-segment digits (e) plus 2x
16-segment digits (d) for depicting the measured value;,the function field comprises 41/2x 7-segment digits (b) for
depicting various measuring functions (a); there are also 2 arrows (f) for depicting the operating status.
Functionfield
Mainfield
8.2 Keys
To operate the device a keypad with 7 keys is provided :
Function : Key
To switch ON the device : ON OFF
To switch OFF the device : ON OFF must be pressed and held down
Function : Key
Selection of measuring points
M▲
or
M▼
Displaying the maximum value :
MAX
To delete press and hold down
Displaying the minimum value :
MIN
To delete press and hold down
Zero-setting the measured value :
CLR
To delete press and hold down
Saving the measured value :
MEM
Displaying the battery voltage : ON OFF
To Next Page
Loading...