Uwatec X650 Repair Guide

SCUBAPRO X650 SECOND STAGE
©2003 SCUBAPRO
Important note: The following information is not designed to be a complete training guide for servicing the listed SCUBAPRO regulators. All SCUBAPRO
technicians are required to attend an annual service training program to insure safe handling and servicing of SCUBAPRO products. All SCUBAPRO technicians
must be employed by an authorized SCUBAPRO facility.
14
P
/
N
4
3
0
4
0
0
0
0
TOOLS
NEEDED
No tools needed
this step
Inspect, clean and install the
diaphragm.
Install the frictionless washer and
cover.
P
/
N
4
3
0
4
0
0
0
0
TOOLS
NEEDED
No tools needed
this step
Install the diaphragm cover by first
engaging the top nipple, then place the
bottom portion.
Gently pull on the cover to ensure it is
installed properly.
Lubricate the hose o’ring and install.
Install the pneumatic adjustment tool
and attach the hose to the tool.

Uwatec X650 Specifications

General

Brand	Uwatec
Model	X650
Category	Diving Instrument
Language	English