5.3 SELECT WEIGHT UNIT
Press MODE to shift between metric or avoirdupois weight
units. The weight unit used before power off would be
employed when the scale is turned on again.
NOTE:
To comply with the law of certain countries and certain
approval requirements, the avoirdupois weight units may
be disabled. Contact your dealer for more information.
5.4 SMART POWER SAVING FUNCTION
When this function is enable, the displays digits will
be turned off when a stable weight is detected and remains
stable for about 10 seconds. Standby indicator appears
to indicate scale is now in standby mode.
Display will be automatically turned on again when a
different weight is detected.
5.4.1 Select Power Saving Setting
The scale is equipped with smart POWER SAVING FUNCTION.
Default setting = enable. Follow the below step to enable
or disable this function.
To Next Page
Loading...