a. Remove all loads from platter.
b. Turn scale on.
c. Scale displays zero weight; if not, press ON/ZERO.
d. Press and hold ON/ZERO. Scale displays:
-L._oFF = Function enable
-L1._on = Function disable.
5.5 SET DISPLAYED VALUE TO ZERO WHEN UNLOADED
Press ON/ZERO can eliminate a positive or negative value
when scale is not at its zero. After ON/ZERO is pressed,
the ZERO INDICATOR appears.
Refer to SPECIFICATIONS for maximum zero range.
NOTE:
-When scale is set at OIML and application is legal for
trade. User only needs to press ON/ZERO once when setting
the value to zero. The re-zero function will take place
when reading is stabled
-When scale is set at Non-OIML and application is not
legal for trade. User can set the value to zero at anytime
when pressing ON/ZERO
To Next Page
Loading...