STEP BY STEP GUIDE
To turn headphones on, slide the 3-way switch to the middle position. LED will start
to blink once per second
Once powered on (3-way switch in middle position) the headphones automatically
connect to last paired device in a few seconds. Be sure the Bluetooth on your
device is on
Once powered on, slide 3-way switch to the right, hold 3 seconds, when the LED
starts to blink twice per second, release the switch. The switch will return to the
middle position and begin to search. Once “V-MODA Crossfade 3” appears in the
“new Bluetooth devices” section on your phone, select it to begin pairing
ON/OFF
CONNECTING PAIRED DEVICES
PAIRING NEW DEVICES
1
3
2
To Next Page
Loading...
