ENGLISH
28
2 - TECHNICAL SPECIFICATIONS
1
.2 - TECHNICAL ASSISTANCE SERVICE
For any installation problem please contact our Customer Service at the number +39-0172.812411 operating Monday to Friday
from 8:30 to 12:30 and from 14:00 to 18:00.
1.3 - EC DECLARATION OF INCORPORATION FOR PARTLY COMPLETED MACHINERY
(DIRECTIVE 2006/42/EC, ANNEX II-B)
The manufacturer V2 S.p.A., headquarters in Corso Principi di Piemonte 65, 12035, Racconigi (CN), Italy
Under its sole responsibility hereby declares that:
the partly completed machinery model(s):
VEGA-C
Identification number and year of manufacturing: typed on nameplate
Description: Electromechanical actuator for balanced door
• is intended to be installed on garage door, to create a machine according to the provisions of the Directive 2006/42/EC.
The machinery must not be put into service until the final machinery into which it has to be incorporated has been declared in conformity
with the provisions of the Directive 2006/42/EC (annex II-A).
• is compliant with the applicable essential safety requirements of the following Directives:
Machinery Directive 2006/42/EC (annex I, chapter 1)
Low Voltage Directive 2006/95/EC
Electromagnetic Compatibility Directive 2004/108/EC
Radio Directive 99/05/EC
Directive ROHS2 2011/65/CE
The relevant technical documentation is available at the national authorities’ request after justifiable request to:
V2 S.p.A., Corso Principi di Piemonte 65, 12035, Racconigi (CN), Italy
The person empowered to draw up the declaration and to provide the technical documentation:
Cosimo De Falco
Legal representative of V2 S.p.A.
Racconigi, 05/04/2012
VEGA-C 230V VEGA-C 120V
Power supply 230VAC - 50Hz 120VAC - 60Hz
Nominal power 280 W 280 W
Line absorption 2,5 A 4,5 A
Absorbed power 575 W 575 W
Full load current 2,5 A 4,5 A
Capacitor 8 μF 30 μF
Average speed 1,6 Rpm 1,9 Rpm
Working temperature -20 ÷ +50 °C -20 ÷ +50 °C
Protection IP20 IP20
Working cycle 30 % 30 %
Motor weight 9 Kg 9 Kg
Max accessories load 24V 3W 3W
Protection fuse 5A 8A