To Next PageTo Next Page
Need help?Do you have a question about the V2 ATRIS-700 and is the answer not in the manual?
General| Brand | V2 |
|---|---|
| Model | ATRIS-700 |
| Category | Gate Opener |
| Language | English |
Detailed wiring diagram and terminal descriptions for the control unit.
Step-by-step instructions for replacing the fuse in the motor unit.
Connecting and configuring the start command input for the control unit.
Instructions for wiring and connecting photocell safety devices.
Connecting and configuring stop buttons and safety edges.
Configuring the control unit's output for flashing or warning lights.
Information on the built-in courtesy light and its operation.
Connecting an external antenna to improve radio range.
Requirements for the 230V-50Hz power supply and protection.
Connecting an optional battery pack for backup power.
Installing and using the MR receiver module with the control unit.
Connecting and configuring optional devices via the ADI interface.
Explanation of the control panel display segments and their meanings.
Instructions on using the control panel keys for programming.
Procedure for setting the opening and closing limit switches for the door.
Procedure for automatically learning and adjusting obstacle sensitivity.
Restoring all control unit parameters to their original default values.
Displaying the total number of completed opening cycles.
Understanding the signal for required maintenance based on cycle count.
