-19-
Cleaning the Pre-Filter
The pre-lter is located inside the dust cup. Check the pre-lter frequently and
clean when dirty.
NOTE:
Make sure the dust cup is free of any debris before opening.
1. Remove the dust cup as outlined in the
Emptying the Dust Cup.
2. Rotate the dust cup lid assembly counterclockwise until marks align to the
unlocked position as shown below.
Dust Cup Lid
Pre-lter
3. Clean off hair and other debris wrapped around the pre-lter. Clean the pre-
lter by gently tapping over a trash container. Tap on several sides to ensure
best cleaning.
To Next Page
Loading...
