Vacmaster VK1620SWC - TROUBLESHOOTING

13
GB
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK-UNPLUG BEFORE
TROUBLESHOOTING.
Cleaning Performance
Vacmaster vacuum cleaners are tested for endurance. If your motor is operating, then the most
likely cause for a loss in suction is a blockage or an opening in the vacuum.
To maintain a high cleaning performance from your machine, it is important to replace or clean
cartridge lters as necessary. Replace full dust bags to prevent performance drops. A performance
drop with clean lters can only be caused by a blockage in the tools or the hose.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
The appliance does not work.
No power.
Check the power supply and
fuse.
Functional fault in the power
cord, switch, or motor.
Have the damaged part
checked by qualied personnel
or contact the after sales
helpline.
Dust is escaping from the motor
cover.
The cartridge lter is missing or
damaged.
Put in a cartridge lter or
replace it.
Misuse the cartridge lter when
wet vacuuming, causing the
damage of cartridge lter.
Replace the damaged cartridge
lter with a new one when dry
vacuuming.
Misuse the foam lter when dry
vacuuming.
Replace the foam lter with the
cartridge lter.
Power tool take-off socket does
not work.
Power tool wattage is not
compatible with the power tool
take-off socket.
Check the wattage is
compatible with the power tool
take-off socket.
Incorrect operating mode
selected.
Ensure the switch is moved into
position II.
Low suction power and high
operating noise / vibrations.
Dust bag is full. Replace the dust bag.
Suction nozzle, hose, or tank
inlet is blocked.
Check the suction nozzle, hose,
and tank inlet for obstructions.
Cartridge lter is blocked.
Remove the cartridge lter and
clean.
Float valve has closed.
Empty the container of any
liquid waste and ensure the
oat value located underneath
the lter is able to move freely.