20 • vacon Installation
Telephone: +358-201-2121 • Fax: +358-201-212 205
5
5. INSTALLATION
5.1 Mounting
5.1.1 MF2 and MF3
There are two possible positions in the wall mounting for the frames MF2 and MF3 (see Figure 5-1)
The NXL type MF2 is mounted with two screws using the middle holes of the mounting plates. If an
RFI filter is used, the upper mounting plate shall be attached with two screws (see Figure 5-2). MF3
and bigger types are always mounted with four screws.
Figure 5-1. The two possible mounting positions of NXL (MF2 and MF3)
Figure 5-2. Mounting of NXL, MF2
X
X
X
X
X
MF2 without a filter
MF2 with a filter
To Next Page
Loading...
