50 • vacon Control keypad
Telephone: +358-201-2121 • Fax: +358-201-212 205
7
7.1.2 Control place indications
(See control keypad)
The symbols
I/O term, Keypad
and
Bus/Comm
(see chapter 7.4.3.1) indicate the choice of control
place made in the Keypad control menu (see chapter 7.4.3).
I/O term
= I/O terminals are the selected control place; i.e. START/STOP commands
or reference values are given through the I/O terminals.
Keypad
= Control keypad is the selected control place; i.e. the motor can be
started or stopped and its reference values altered from the keypad.
Bus/Comm
= The frequency converter is controlled through a fieldbus.
7.1.3 Numeric indications
(See control keypad)
The numeric indications provide the user with information on his present location in the keypad
menu structure as well as with information related to the operation of the drive.
b
c
a
To Next Page
Loading...
