74 • vacon Control keypad
Telephone: +358-201-2121 • Fax: +358-201-212 205
7
For more information on the expander board-related parameters, see Chapter 7.4.8.
Figure 7-16. Expander board information menu
7.4.6.6 AI mode
The parameters P6.9.1 and P6.9.2 selects the analogue input mode. P6.9.1 appears only in classes
MF4 – MF6
0 = voltage input (par. 6.9.1 default)
1 = current input (par. 6.9.2 default)
Note! Make sure that the jumper selections correspond to the selections of this parameter. See
Figure 6-25.
STOP
I/O
term
READY
STOP
I/O
term
READY
nxlk27.fh8
To Next Page
Loading...
