VADDIO RoboSHOT 12 - System Commands: Factory Reset

RoboSHOT HD Camera Systems
RoboSHOT HD Cameras - Document Number 342-0794 Rev C Page 56 of 68
SystemFactory‐Reset
 NAME
system factory-reset - Gets or sets factory reset status
 SYNOPSIS
system factory-reset {get|on|off}
 DESCRIPTION
Method used to get or set the factory reset status
 OPTIONS
get
Get the current factory reset status
on
Enable factory reset on reboot
off
Disable factory reset on reboot
 EXAMPLES
system factory-reset get
factory-reset (software):
off
factory-reset (hardware): [Hardware reset is designated by rear panel DIP switches in down position]
off
Returns the factory reset status
---
system factory-reset on
factory-reset (software): on
factory-reset (hardware): off
Enables factory reset upon reboot
SystemReboot
 NAME
system reboot - Reboots system
 SYNOPSIS
system reboot [<seconds>]
 DESCRIPTION
Method used to reboot system
 OPTIONS
seconds
The number of seconds to delay the reboot
 EXAMPLES
reboot
Reboot system immediately
reboot 30
Reboot the system in 30 seconds










