To Next PageTo Next Page
Need help?Do you have a question about the VADDIO ZOOMSHOT 20 and is the answer not in the manual?
General| Brand | VADDIO |
|---|---|
| Model | ZOOMSHOT 20 |
| Category | Security Camera |
| Language | English |
Details the product's intended application and essential safety guidelines for operation.
Covers initial setup considerations, including mounting location and cable routing.
Provides a detailed sequence of actions for installing the ZoomSHOT 20 QUSB system.
Describes access to camera controls and settings via the web interface.
Explains how to configure the device's IP address using DHCP or a static method.
Details the controls available in the user menu for managing camera functions like zoom and presets.
Explains how to adjust camera settings, CCU scenes, and startup assignments via the admin menu.
Describes how to fine-tune and store CCU scenes, including custom labels.
Details how to select and configure USB 2.0 or IP streaming modes for video output.
Explains the configuration of streaming protocols (RTSP, HLS) and associated URLs.
Describes how to configure network interfaces using DHCP or static IP addresses.
Details how to update user and administrator passwords for system security.
Provides details on system version, reboot options, and factory reset capabilities.
Guides the user through the confirmation and process of updating the device firmware.
Provides contact information and resources for Vaddio technical support.
Explains the two-year limited warranty, its terms, and common exclusions.
Provides information on obtaining customer service, technical support, and return material authorization.
Lists serial commands for controlling camera power, zoom, focus, white balance, and gain.
Lists serial commands for backlight, aperture, memory, ID write, and other functions.
Details commands for performing factory resets and rebooting the system.
