7
2.2 SYSTEM COMPONENTS 系统组成部分
The ViscoSense
®
2 viscosity system consists of: 扭转振动黏度测量系统包括
the combined viscosity and temperature measuring sensor 黏度及温度测量传感器
the sensor housing 传感器安放室
Interface box 界面盒
The sensor housing is made of ductile iron and has flanges for direct mounting in the fuel line. The
sensor itself is made of stainless steel and is mounted in the housing. The sensor head has a
special Teflon
®
coating and it is mechanically protected by a stainless steel flowtube with 3 oval slits.
It is supplied with 5 metres of signal cable for connection to the interface box. The ViscoSense
®
2
Interface box is a wall mount electronic unit, processing the signals from and to the sensor. It
provides 4..20 mA signals for remote read-out of viscosity and temperature for a controller or other
system elements. See separate technical manuals for a description of these components.
传感器安放仓室由球墨铸铁制成，其两侧连接法兰便于直接在管路中安装。传感器本身由不锈钢制
成，安放在仓室中。传感器探头的表面经过特富龙
®
特殊处理，并且受到其上有三个椭圆形开口的不
锈钢流管的机械保护。传感器自带5米长的信号电缆用于与界面接口盒之间联接。第二代ViscoSense
®
传感器界面盒系壁式安放电子装置，加工处理来自及传送至传感器的信号。输出4-20mA电流信号用
于控制器或其他系统组件远程温度黏度显示。请分别参阅这些部分的专门技术手册。
Housing
探头安放仓室
Flow
流动
ViscoSense Sensor
探头
Cable Length ± 5 Meters
连接缆线长度约5米
ViscoSense Interface Box
界面接口盒
Figure 2 ViscoSense
®
2 components
图
2
传感器组件
To Next Page
Loading...
