EasyManua.ls Logo

Vaillant ecoFIT sustain 615 User Manual

Vaillant ecoFIT sustain 615
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operating instructions
ecoFIT sustain
615 - 630
GB, IE
Publisher/manufacturer
Vaillant GmbH
Berghauser Str. 40 D-42859 Remscheid
Tel. +492191180 Fax +492191182810
info@vaillant.de www.vaillant.de

Other manuals for Vaillant ecoFIT sustain 615

Question and Answer IconNeed help?

Do you have a question about the Vaillant ecoFIT sustain 615 and is the answer not in the manual?

Vaillant ecoFIT sustain 615 Specifications

General IconGeneral
BrandVaillant
ModelecoFIT sustain 615
CategoryWater Heater
LanguageEnglish

Summary

Safety

Action-related warnings

Classification of warnings by signal words and symbols for imminent danger, severe personal injury, death, and material damage.

General safety information

Key safety advice including installation by competent persons and risks of improper operation or escaping gas.

Installation by competent persons only

Safety requirement for installation, maintenance, and repair to be performed only by qualified personnel.

Danger caused by improper operation

Risks associated with incorrect operation and the importance of following instructions and warnings.

Risk of death from escaping gas

Actions to take if gas is smelled, including ventilation, avoiding ignition sources, and contacting authorities.

Risk of death due to blocked or leaking flue pipework

Procedure for dealing with detected flue gas leaks, including ventilation and informing a competent person.

Risk of death due to explosive and flammable materials

Prohibition of product use in storage rooms containing explosive or flammable substances.

Risk of death due to changes to the product or the product environment

Warning against tampering with safety devices, removing seals, or altering product components and supply lines.

Risk of corrosion damage due to unsuitable combustion and room air

Precautions against corrosive substances in combustion air and at the installation site.

Risk of material damage caused by frost

Ensuring the heating installation remains operational during freezing conditions.

Risk of injury and material damage due to maintenance and repairs

Emphasis on professional maintenance and repairs, and adherence to specified intervals.

Product Description

Operation

Setting the Heating Flow Temperature

Steps to adjust the heating flow temperature, with conditions for controller-connected or non-connected systems.

Setting the Hot Water Temperature

Instructions for setting hot water temperature, including Legionella risk warning and consulting a competent person.

Troubleshooting

Detecting and Rectifying Faults

Guidance on proceeding with faults according to appendix tables and contacting a competent person.

Care and Maintenance

Appendix

Troubleshooting Faults

Table detailing faults, causes (e.g., no hot water, heating cold), and recommended measures.

Related product manuals