Vaillant ElectronicVED E 24/8 INT User Manual

de Betriebsanleitung
de Installationsanleitung
en Operating instructions
en Installation instructions
fr Notice d’emploi
fr Notice d’installation
hr
Upute za korištenje
hr
Upute za instaliranje
мк
Упатство за користење
мк Упатство за инсталација
nl Gebruiksaanwijzing
nl Installatiehandleiding
sl Navodila za uporabo
sl Navodila za namestitev
sq Manuali i përdorimit
sq Udhëzuesi i instalimit
sr Uputstvo za rad
sr Uputstvo za instalaciju
tr Kullanma kılavuzu
tr Montaj kılavuzu
int Country specifics
electronicVED
VED E ../8 INT
Publisher/manufacturer
Vaillant GmbH
Berghauser Str. 40
D-42859 Remscheid
Tel. +492191 18 0
Fax +492191 18 2810
info@vaillant.de
www.vaillant.de

Vaillant ElectronicVED E 24/8 INT Specifications

General

Type	Electronic Instantaneous Water Heater
Rated Power	24 kW
Nominal Voltage	400 V
Protection Class	IP 25
Specific Flow Rate at ΔT 25K	11.5 l/min
Dimensions (H x W x D)	481 x 240 x 99 mm
Connection Size	1/2 inch
Maximum Operating Pressure	10 bar
Energy Efficiency Class	A

Summary

Safety

Intended Use

Defines intended use, suitability, and limitations of the product.

Intended use

Describes the product's intended purpose and limitations.

General Safety Information

Provides general safety instructions for operation and handling.

General safety information

Provides essential safety guidelines for installation and handling.

Risk of scalding caused by hot water

Warns about potential burns from hot water dispensed by the product.

Risk caused by inadequate qualifications

Specifies that certain tasks require qualified personnel.

Start-up and Operation

Starting up the Product

Operating the Product

Faults

Maintenance and Care

Risk due to inadequate qualifications

Risk of death from electric shock

Risk of death from electric shock from live lines and connections

Risk of death due to incorrect electrical installation

Risk of scalding from hot water

Start-up and operation

Starting up the product

Operating the product

Maintenance and care

Set-up

Installing the product on the wall

Provides step-by-step instructions for mounting the product onto a wall.

Installation

Setting up the domestic hot and cold water connection

Connecting the product to the electricity supply

Detailed steps for safely connecting the product to the electrical power.

Start-up

Removing air pockets from the product

Fitting the product casing

Checking the function

Activating the scald protection function

Handing over to the end user

Troubleshooting

Inspection and maintenance

Decommissioning

Appendix

Troubleshooting

Troubleshooting table with common problems and solutions.

Technical data

Risk of being burned or scalded by hot components

Removing the product casing

Installing the product

Electrical connection (top entry)

Electrical connection (bottom entry)

Installing an optional load shedding relay

Checking the function

Activating the scald protection function