Need help?Do you have a question about the Vaillant ecoTEC sustain 24 and is the answer not in the manual?
General| Boiler Type | Combi |
|---|---|
| Central Heating Output (kW) | 24 |
| ErP Rating | A |
| Fuel Type | Natural Gas |
| Efficiency | 89.3% |
| Dimensions (HxWxD) | 720x440x338 mm |
| Warranty | 5 years |
Classification of warnings based on severity using symbols and signal words for immediate danger, death, injury, or damage.
Defines the product's purpose as a heat generator and specifies permitted users and prohibited uses.
Covers dangers from improper operation, gas leaks, blocked flue pipes, flammable materials, product modifications, and combustion air.
Emphasizes the need to follow instructions for all system components.
Advises keeping the manual and other documents safe for future use.
States that the instructions apply only to specific product article numbers.
Details the physical components and layout of the product, including identification labels.
Explains the symbols, modes, and information shown on the product's digital display.
Lists details found on the product's identification plate, such as serial number, article number, and technical specifications.
Explains where to find the serial number on the product and its purpose.
Describes the meaning of the CE label, indicating compliance with directives.
Explains the 'Energy Saving Trust Endorsed Product' brandmark and its benefits for consumers.
Explains how the product is operated using buttons and the display, including saving settings and timeouts.
Describes the information shown on the product's basic display and how to return to it.
Differentiates between the operator level and the installer level, noting the need for an access code for the latter.
Provides a step-by-step guide for opening essential isolator devices before operating the product.
Details the procedure for safely switching the product on after installation.
Explains how to adjust the heating flow temperature, noting conditions where it cannot be set directly.
Details how to adjust the hot water temperature, with conditions where direct adjustment is not possible.
Covers procedures for switching off heating mode (summer mode) and hot water handling.
Explains how to ensure the correct filling pressure in the heating circuit.
Details the process for checking the current system pressure displayed by the product.
Provides a step-by-step guide on how to fill the heating installation with water, including cautions.
Describes how to put the product into standby mode and its implications.
Guides users on how to identify and resolve product faults based on messages and competent person advice.
Explains how to view status codes on the display for diagnostic purposes.
Stresses the importance of annual inspection by a competent person for product longevity and safety.
Provides instructions on cleaning the product casing safely, warning against certain cleaning agents.
Explains how to interpret maintenance messages indicated by symbols on the display.
Advises regular checks of the condensate drain for blockages and obstructions.
Details how to temporarily shut down the product, noting frost protection limitations.
States that permanent decommissioning must be carried out by a competent person.
Outlines the one-year parts and labour guarantee, registration process, and first point of contact for faults.
Recommends arranging a Maintenance Agreement and provides contact details for service.
Details settings available at the operator level for DHW and heating modes, including default values.
Provides a table of status codes and their meanings for diagnosing product behaviour.
Lists common symptoms, possible causes, and measures to resolve issues.
Provides specific steps for addressing fault messages like 'F.28 Ignition unsuccessful'.
To Next Page
