1 Safety
4 Installation and maintenance instructions vSMART 0020212888_01
Operation is permissible with the following
components and accessories:
– Domestic hot water cylinder (conventional)
Intended use includes the following:
– observance of accompanying operating, in-
stallation and servicing instructions for the
product and any other system components
– installing and fitting the product in accord-
ance with the product and system approval
– compliance with all inspection and main-
tenance conditions listed in the instruc-
tions.
Intended use also covers installation in ac-
cordance with the IP class.
The use of the product in vehicles, such as
camper vans and caravans, is not classed as
intended use. Units that are not classed as
vehicles are mobile homes or those that are
installed in a fixed and permanent location
(known as "fixed installation").
Any other use that is not specified in these
instructions, or use beyond that specified in
this document shall be considered improper
use. Any direct commercial or industrial use is
also deemed to be improper.
Caution.
Improper use of any kind is prohibited.
1.4 General safety information
1.4.1 Risk of death from contaminated
drinking water
▶ Inform the operator about the measures for
protecting against legionella in the drinking
water installation.
1.4.2 Danger due to malfunctions
▶ Ensure that the heating system is in a tech-
nically perfect condition.
▶ Ensure that no safety or monitoring
devices have been removed, bridged or
disabled.
▶ Immediately rectify any faults and damage
that may affect safety.
To Next Page
Loading...
Need help?
General
