Installation 4
0020212888_01 vSMART Installation and maintenance instructions 7
3.2 Information on the identification plate
The identification plate is mounted on the rear of the commu-
nication unit and the thermostat in the factory.
Information on the
identification plate
Meaning
Barcode with serial number (on the
communication unit only),
7th to 16th digit = product article number
→ "CE label" section
vSMART Product description
V mA Operating voltage and current consump-
tion
→ "Recycling and disposal" section
3.3 CE label
The CE label shows that the products comply with the basic
requirements of the applicable directives as stated on the
identification plate.
The declaration of conformity can be viewed at the manufac-
turer's site.
The manufacturer hereby declares that the type of radio
equipment used in the product complies with directive
2014/53/EU. The complete text of the EU declaration of
conformity can be viewed at the manufacturer's site.
4 Installation
4.1 Checking the scope of delivery
▶ Check that the scope of delivery is complete.
4.1.1 Scope of delivery
Number Description
1
Thermostat
1 Communication unit
1 Product stand for thermostat
1 Small wall socket for thermostat
1 Large wall socket for thermostat
1 Wall socket for communication unit
1 Power supply unit for communication unit
3 Batteries for the thermostat
1
Enclosed documentation
To Next Page
Loading...
Need help?
General
