EasyManua.ls Logo

Vaisala HUMICAP HM70 - MI70 Status Icons; Installing and Recharging MI70 Batteries

Vaisala HUMICAP HM70
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.2 MI70 status icons
Icons that inform you about the status of MI70 (for example, battery status and alarm notifica
tion)
are shown on the upper left corner of the display. Multiple icons can be shown simultaneously.
Table 3 MI70 status icons
Icon Description
Battery status icon. The icon can show the following info:
0 ... 8 bars, no animation:
batteries are in use, a charger is not connected
if a charger is connected: non-rechargeable batteries installed
if a charger is connected: waiting for the battery temperature to settle
between 0 ... +40 °C (+32 ... +104 °F)
if a charger is connected and the icon remains at 8/8 bars: the battery is
full
Animated battery status icon: battery is charging (or recovering after
emptying out completely). The charging animation is shown also when the
indicator is powered o.
Battery icon not present: batteries are not installed
The battery can no longer be charged and must be replaced. If the indicator is
po
wered on, a notification about not being able to charge the battery is shown
on the MI70 screen.
You can order replacement batteries from Vaisala (item code 26755).
Recording icon. Shows that the measurements are being recorded. The bar
sho
ws for how long the recording will continue (a set time limit or until the
memory runs out). The recording icon and bar are shown also when the
indicator is powered o.
Calibration reminder icon. Appears when a calibration reminder has been set
t
o inform that a user-defined interval has passed and calibration is due.
Analog output icon. Shown when the analog output mode is in use.
PC connection icon. Shown when the indicator is connected to a PC with a
cable
.
Alarm icon. Shown when the measurement has reached a user
-defined alarm
limit.
2.3 Installing and recharging MI70 batteries
If you are using alkaline batteries, unscrew the back plate of the indicator and insert the
batteries. Do not attempt to recharge standard alkaline batteries.
If you ordered MI70 with a rechargeable battery, it is already in place as shipped from the
factory. The delivered batteries have been pre-charged.
M212070EN-B
10

Other manuals for Vaisala HUMICAP HM70

Related product manuals