Vaisala PWD22/52 - Mounting; Figure 8 Installing PWD22;52 to the Support Arm; Figure 9 Installing the Subassembly to the Mast with the Vaisala

Chapter 4 _______________________________________________________________ Installation
VAISALA _______________________________________________________________________ 33
Mounting
When installing PWD22/52 with the sensor support arm, proceed as
follows:
1. Install PWD22/52 to the support arm. See Figure 8 below.
0308-005
Figure 8 Installing PWD22/52 to the Support Arm
0308-004
Figure 9 Installing the Subassembly to the Mast with the
Vaisala Clamp Assembly
2. Or install the subassembly to the mast. See Figure 9 above.
NOTE
Do not damage the RAINCAP
®
plate.