Vaisala PWD22/52 - Weather Related Commands; Wpar; Wset

Chapter 5 ________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 59
Weather Related Commands
The following commands are used to display/set the weather analysis
parameters and results.
- WPAR Weather parameter message
- WSET PRW reference values
- CLRS Clear precipitation sums
WPAR
The WPAR command displays the present weather analysis parameters.
WEATHER PARAMETERS
PRECIPITATION LIMIT 40
WEATHER UPDATE DELAY 6
RAIN INTENSITY SCALE 1.00
HEAVY RAIN LIMIT 8.0
LIGHT RAIN LIMIT 2.0
SNOW LIMIT 5.0
HEAVY SNOW LIMIT 600
LIGHT SNOW LIMIT 1200
DRD SCALE 1.0
DRD DRY OFFSET 809.5
DRD WET SCALE 0.0017
WSET
The WSET command is used to modify the present weather analysis
parameters.
The WSET command asks for one parameter at a time, showing the
parameter name and the current setting. The current value is accepted by
pressing ENTER. A new value can be given by typing the value before
pressing ENTER. The output is as follows:
SET PRESENT WEATHER PARAMETERS
PRECIPITATION LIMIT ( 40)
WEATHER UPDATE DELAY ( 6)
SYNOP HAZE LIMIT ( 10000)
METAR HAZE LIMIT ( 5000)
RAIN INTENSITY SCALE ( 1.00)
HEAVY RAIN LIMIT ( 8)
LIGHT RAIN LIMIT ( 2)
SNOW LIMIT ( 5.0)