USER'S GUIDE____________________________________________________________________
78 __________________________________________________________________ M210543EN-E
Other Commands
TIME
The TIME command is used for maintenance purposes. To display the
current system time, type the following:
TIME
The following is an example of the system output:
10:11:12
To set the time, use the following command:
TIME hh mm ss
where
hh = hours
mm = minutes
ss = seconds
NOTE
The time and date has to be reset after a power break. There is no battery
backup!
DATE
The DATE command is used to display the current date.
To set a new system date, type the following:
DATE yyyy mm dd
where
yyyy = year
mm = month
dd = day
To Next Page
Loading...