Val Controls IDC24-A - Page 34

DID-UM-002
Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600
vc@valcontrols.com • www.valcontrols.com
Revision: 10
34/74
No. 414
PST Error: Pressure below minimum allowed
Description
Breakaway is detected but pressure is below the Minimum allowed pressure
during the travel
Trouble shooting
This error may be due to:
• Increased torque in the actuator or valve.
• Broken spring
The error can be solved by:
• Resolve the mechanical problem
• Decrease Minimum allowed pressure