Val Controls IDC24-A - Product Application; IDC Overview

DID-UM-002
Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600
vc@valcontrols.com • www.valcontrols.com
Revision: 10
4/74
2 Application
The IDC from Val Controls is an Intelligent Diagnostic Controller. To be used for valve testing and
operation. It has an integrated microprocessor with very flexible software, which makes the IDC fits
almost any hydraulic and pneumatic, rotary and linear, double acting and spring return actuator on
the market.