Val Controls IDC24-A - Software Revision List; Software Revision Details

DID-UM-002
Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600
vc@valcontrols.com • www.valcontrols.com
Revision: 10
73/74
11 Software revision list
Version 1.09.00
New functions
• Control a digital output based on the value of an analogue input
Version 1.10.00
• HART revision increased to 04
• Control a digital output with a digital input
Version 1.10.01
• Minor improvements
Version 1.10.02
• Bluetooth stability improvements
Version 1.13.00
• Added System Error 113 and 114. AO1 And AO2 not calibrated
• Added System Error 102: AI10 not connected
• Added System Error 103: AI1 not connected
• Added Disable Bluetooth from Digital input
• Improvements to EST recording
Version 1.14.00
• Endpoint calibration can be performed from ValConnect
• Bluetooth and MTcontrol enable functions are combined with Local switch
Version 1.14.01
• Minor improvements
Version 1.14.02
• Show psi on main page
Version 1.15.00
• HART SV, is now the status of the last PST. (Can be changed through ValConnect)
• Open/close extra LED blink when moving can be disabled
• Minor improvements
Version 1.16.00
• New feature: Wait at SP in PST