Val Controls IDC24-A - Page 49

DID-UM-002
Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600
vc@valcontrols.com • www.valcontrols.com
Revision: 10
49/74
No. 462
FST error: Breakaway timeout
Description
Breakaway is not detected before the Breakaway timeout was exceeded
Trouble shooting
This error may be due to:
• Blocked output of actuator
• Solenoid valve is stuck
This error can be solved by:
• Clear the output of the actuator
• Increasing the Breakaway timeout